1、 Overview

SEC-810^#It is a neutral liquid diluted with waterIts function is to remove light oil stain and various salts on the board surface. It will not generate foam. Soaking and spraying methods can be applied.

SEC-810^#It can be used to clean a small amount of oil stains, sweat spots, scale and other organic and inorganic pollutants on the surface of printed circuits caused by insufficient cleaning of the manufacturing process, and clean printed circuits to meet the requirements of ion pollution indicators.

two、 Technical indicators and operation methods

Appearance: colorless liquid

Density:0.95±0.05

Usage: 10-two0% (it must be diluted with distilled water or deionized water, and other water is not allowed.)

processing method: soaking or spraying

processing time : 10 + 10 seconds. If the board is seriously polluted, it is recommended to use ordinary acid cleaning agent (such as en-313 of our company)^#）Pretreat and wash with water, then blow dry, and then use double tanksSEC-810^#Soak each10 seconds, dry with clean air

Consumption: ≥ 50Ft^two/Kg, depending on the degree of pollution

packing:two0Kg/two5Kg

3、 Storage and precautions

Storage: store at room temperature for six months.

matters needing attention: organic solvent with high boiling point, it may have adverse effects on the body and should not be drunk.

In case of contact with eyes or other parts of the body, wash with plenty of water.