1、 Overview
Developer s-655# is a kind of developer specially used for high-quality solder proof ink / line dry filmThe main components are high-purity potassium carbonate, fiber dissolving agent, water softener, non silicon defoamer and other high-grade raw materials. This product has the advantages of excellent analytical ability, excellent stability and long service life, so it is widely used in the production of high-density and thin linesIn HDI process, it is used as a substitute for sodium carbonate solution.
This product series is divided into cylinder opening agentS-655a, supplement s-655r or 10x concentrated supplement s-655p.
2、 Its physical and chemical properties, uses and precautions are introduced as follows:
1. Physical characteristics
Product name s-655a s-655r s-655p
The appearance is colorless and transparent, and the liquid is the same as left and right
Density D20 / 20 1.00-1.02 same as left and right
Freezing point - 0.8 -- 1 ℃ same as left and right
2. Chemical properties
Product name s-655a s-655r s-655p
Potassium carbonate content: 1.4-1.8%, 1.8-2.0%, 20-22%
PH 11-11.4 11-11.4 12-12.4
Silicon free
Flammability and nonflammability
3. Process parameters
Item / index anti welding ink line ink
Cylinder opening s-655a stock solution is the same as that on the left
Temperature: 30-32 ℃ 28-30 ℃
Spray pressure 1.8-3.5kg/cm2 1.5-3.0kg/cm2
PH 11.2±0.2 11.0±0.2
Initial point: 30% - 40%, 35% - 50%
Automatically add the automatic adding system based on pH control, and set the pH value to 11.2
The replacement cycle is 1-2 weeks or 30000-40000 ft2, and the slot and nozzle are cleaned at the same time
The above parameters are set with a certain brand of ink as a reference, and may not be suitable for all brands and models of ink. They need to be adjusted according to the instructions of the ink.
4. Test method:
1. Transfer 5ml of the sample to a 250ml conical flask and add 50ml of distilled water;
2. Drop 5 drops of bromocresol green methyl red mixed indicator;
3. Titrate with 0.1N hydrochloric acid standard solution until the solution changes from green to dark red, boil for 2 minutes, and continue titrating to dark red after cooling;
4. Blank test shall be conducted at the same time.
5. Calculate potassium carbonate content (%) = 1.38 (v-v0) C / D V: volume of hydrochloric acid standard solution consumed by the sample, ml;
V0: volume of hydrochloric acid standard solution consumed in blank test, ml;
C: Accurate concentration of hydrochloric acid standard solution, mol / L;
d: Density of the specimen.
5.matters needing attention
This product is a weakly alkaline liquid and does not belong to dangerous chemicals.
Try to avoid direct contact with human body. Clean the skin with clean water; If splashed into eyes, wash with plenty of water.This product should be packaged in plastic containers and stored in a cool and ventilated place.
Valid for one year.
03-03
Sec-066 cleaning agent
Plate washing waterSEC-66eight#The main components areDimethoxymethane, dichloromethane and methanol,It has excellent physical and chemical properties, i.e. good solubility, low boiling point and good
03-03
S-655 developer
DeveloperS-655#It is a kind of anti welding ink specially used for high quality requirements/線路干膜使用的Developer,主要成分by高純度的碳酸鉀及溶纖劑、軟水劑、非silicon型消泡劑等高級(jí)原料。This producthaveHave excellentAnalytical abilityan
03-03
158# film cleaner (without n-hexane)
Film cleanerSEC-one5eight#It is a quick drying electrostatic cleaning agent composed of low boiling solvent. It is suitable for cleaning and removing static electricity of various silver salt films (b
03-03
155# film cleaner (flame retardant)
Film cleanerSEC-onefivefive#It is a quick drying electrostatic cleaning agent composed of low boiling solvent. It is suitable for cleaning and removing static electricity of various silver salt films